If you get this far and the Ooma works okay, go back into the Apple Airport Express and set the Wi-Fi network security level to WPA2PSK/AES (or near this level). Make sure you have the Wi-Fi Internet connection. Enter the Apple Airport Express Wi-Fi password. Place a check mark in the box in front of the Network Name that you plan on using (your Apple Airport Express Wi-Fi network). Then go into Ooma Setup>Wireless page and place an check mark in the box in front of Network Name (if there is any networks found), the click on the Delete button, (you cannot reuse the previously scanned and entered Wi-Fi network information). Next access the Apple Airport Express and temporarily set the Wi-Fi security level to off. Using an Ethernet cable, connect the HOME NETWORK port on the back of your Telo to a computer) nothing works.įirst make sure the Apple Airport Express Wi-Fi network is setup and has a password. dapter-faq (Plug the Adapter into the USB port on the back of your Telo. If I follow the connection instructions on. After a short time the Wireless Settings Screen says "No active wireless networks" and network name is "none." It also allowed me to go to and scan for wireless networks, select mine, enter the password. That allowed Ooma to connect and deliver a dial tone. Turn on the Modem, wait til it gets online, then Ooma, wait until all lights turn blue, then turn on Airport Express. Connect Airport Express to Ooma's "Home Network" port.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |